Isolation Systems Inc.

Company Overview

Isolation Systems Inc. offers full-service design, engineering and manufacture of standard and custom-built airborne contamination control, containment and extraction systems including glove box isolators, mobile cleanrooms, exhaust and recirculation hoods, pass thrus, luminaries and cleanroom systems. These systems meet or exceed all performance and conformance standards. Isolation Systems offers customer support and service through all aspects of system design, engineering to final manufacture, certification and validation. The company also offers complete installation, field certification and testing services performed by factory-trained installers and technicians.

Quick Facts
Isolation Systems Inc.
P.O. Box 1731
Dearborn, MI 48121

Web:	www.isolationsystemsinc.com

Phone:	(888) 764-7775
Fax:	(888) 764-7775

Featured Solutions

• Positive-negative, powder transfer, static, sterility test glove boxes by ... by Isolation Systems Inc.
  Isolation Systems Inc.'s glove box isolators are fully welded, coved for easy cleaning and feature support frames of stainless steel tubes, laminated safety glass view panels, stainless steel glove ports and neoprene rubber gloves and sleeves.
  
  
• Clean room luminaries, by Isolation Systems Inc. by Isolation Systems Inc.
  Isolation Systems Inc.'s line of clean room luminaries have been designed to totally eliminate particulate and vapor migration into Class 100 clean areas, providing an impenetrable barrier against microscopic particulate infiltration.
  
  
• Constant volume, recirculation, polypropelene, supplemental air fume exhaust ... by Isolation Systems Inc.
  Isolation Systems Inc.'s exhaust hoods feature stainless steel, removable exterior side panels for easy service access, air flow management with an adjustable baffle system, fluorescent lighting and counterbalanced infinitely adjustable vertical sliding sash.
  
  
• Modular hardwall, softwall cleanrooms by Isolation Systems Inc. by Isolation Systems Inc.
  Isolation Systems Inc.'s cleanroom enclosure systems are designed and engineered to provide rugged durability with long-lasting aesthetic appeal, versatility and adaptability to changing conformance requirements.
  
  
• Cleanroom pass throughs by Isolation Systems Inc. by Isolation Systems Inc.
  Isolation Systems Inc.'s pass thrus feature stainless steel construction, mechanical interlocking door systems, coved interior corners, acrylic safety glass doors, continuous compression bulg gaskets and HEPA filtration at 99.99 percent EFF at 0.3 microns.
  
  
• Consoles by Isolation Systems Inc. by Isolation Systems Inc.
  Isolation Systems Inc.'s consoles feature stainless steel construction, HEPA filtration that is 99.99 percent efficient at 0.3 microns, knife-edge to gel-seal trough to prevent air bypass between HEPA filter and frame, and clear acrylic side panels.
  
  
• CRW Series Modular Lear Rigid Wall Cleanroom System by Isolation Systems Inc.
  Isolation Systems Inc. has developed the modular light weight CRW series cleanroom system for ease of specification and installation.
  
  
• Softwall Cleanrooms and Process Enclosures by Isolation Systems Inc.
  <P>Isolation Systems Inc. offers softwall cleanroom and process enclosures to aid in any cleanroom construction. </P>
  
  
• NPI and PPI positive-negative pressure glove box isolation systems by Isolation Systems Inc.
  Isolation Systems Pressure Glove Box systems feature fully welded 14 ga. 304 stainless steel construction with #4 finish on both exterior and interior surfaces, all welds are ground smooth and polished to matching finish, all interior corner transitions are coved for ease of cleaning, and a pass thru chamber allows for material introduction.
  
  
• PCI-1 and PCI-2 Potent Compound Glove Box Isolator by Isolation Systems Inc.
  The Potent Compound Glove Box Isolator by Isolation Systems, Inc. is engineered for negative pressure applications and features a stainless steel construction and pass-thru chamber for material introduction.
  
  
• XPI-1 and XPI-2 explosion proof powder transfer glove box isolator by Isolation Systems Inc.
  Isolation Systems Explosion Proof Powder Transfer Glove Box Isolator features a lift frame for ergonomic height adjustment for operator comfort, hinged service and equipment introduction lift up front sash with gas cylinder assist, support frame is 14 ga 1½” sq. 304 stainless steel tube with a brushed #4 finish with leg levelers.
  
  
• SI-1 and SI-2 static glove box isolators by Isolation Systems Inc.
  Isolation Systems Static Glove Box Isolators feature 10” dia. round stainless steel glove ports with compression seal rings, one piece Hypalon coated rubber gloves and sleeves, fluorescent lighting with electronic energy saving ballast, illuminated power and light switches, tri-clamp and cap penetrations into main chamber for service connections.
  
  
• ST-1 and ST-2 sterility test isolation glove box by Isolation Systems Inc.
  Isolation Systems Sterility Test Isolation Glove Box feature motorized supply HEPA filtration 99.99% eff.@ .3 and blank off panels for filter change out.
  
  
• Class 100 clean room luminaries by Isolation Systems Inc.
  The Isolation Systems, Inc. line of clean room luminaires have been designed to totally eliminate particulate and vapor migration into class 100 clean areas.<BR>
  
  
• FT series Flow Thru clean room luminaries by Isolation Systems Inc.
  Registration is not necessary to view, download or add this product information from Isolation Systems Inc. to My Library.
  
  
• TD-12-FM and TD-14-FM tear drop air foil luminaries by Isolation Systems Inc.
  <P>Isolation Systems TD-12-FM and TD-14-FM tear drop air foil luminaries are an integral part of facility and cleanroom efficiency. </P>
  
  
• GLS, GLL and GLW series of general laboratory fume exhaust hoods by Isolation Systems Inc.
  Isolation Systems GLS, GLL and GLW series of general laboratory fume exhaust hoods are capable of regulating exhaust and air flow to ensure air quality control.
  
  
• PVLE series polypropylene vertical laminar flow exhaust hood by Isolation Systems Inc.
  Isolation Systems PVLE series polypropylene vertical laminar flow exhaust hood is capable of regulating exhaust and air flow ensuring air quality control..
  
  
• VLR Series of Vertical Laminar Flow Recirculating Hood by Isolation Systems Inc.
  The Vertical Laminar Flow Recirculating Hood by Isolation Systems Inc. offer HEPA filtration and a backward curved integral blower motor for efficiency.
  
  
• Supplemental air fume exhaust hoods by Isolation Systems Inc.
  <P>Isolation Systems presents product info for its supplemental air fume exhaust hoods for air handling and air quality applications. </P>
  
  
• PTLF-22 laminar flow interlocking pass thru by Isolation Systems Inc.
  Isolation Systems Inc. provides product lit for the PTLF-22 laminar flow interlocking pass thru for air handling and qir quality control
  
  
• PT-12, PT-22 and PT-33 coved corner interlocking pass thru by Isolation Systems Inc.
  Isolation Systems Inc. provides product lit for the PT-12, PT-22 and PT-33 coved corner interlocking pass thru for air handling and qir quality control..
  
  
• HLFC Series Horizontal Laminar Flow Console by Isolation Systems Inc.
  The Horizontal Laminar Flow Console by Isolation Systems Inc. offers HEPA filtration and a protective perforated 304 stainless steel screen down-stream for increased efficiency.
  
  
• HRFC series of horizontal reverse flow console by Isolation Systems Inc.
  The Horizontal Reverse Flow Console offers HEPA filtration 99.99% efficient @ .3 microns, knife-edge to gel-seal trough to prevent air bypass between HEPA filter and frame, and pre-filtration is 70% efficient disposable POLY-FIBER.