Process Equipment
FEATURED REPORTS
WHAT'S NEW
-
New multiple stream mixer reactor from Microfluidics Corp.
by Microfluidics Corp.
Application note
This application note by Microfluidics Corp. describes its Multiple Stream Mixer Reactor (MMR), a patented continuous mixer/reactor that pressurizes liquids and converts the pressurized energy to intense mixing in a proprietary mixing chamber.
-
M-210EH Series Pilot Scale Microfluidizer Processors
by Microfluidics Corp.
Product collateral
The M-210EH Series A, B and C Microfluidizer Processors are pilot-scale machines that provide high shear rates, and are available to provide the user with a broad choice of operating pressures and product flow rates.
REPORTS BY SUBTOPIC
BD FACSAria Cell Sorter
By BD Biosciences
Application note
In this application note, BD Biosciences offers an operational assessment of its BD FACSAria cell sorter aerosol management system (AMS), which promotes containment of aerosols generated during the normal sorting process and during failure modes.
Airnet Aerosol Particle Sensors
By Particle Measuring Systems
Product collateral
Airnet sensors make it easy and cost-effective to simultaneously monitor aerosols from multiple locations.
IsoAir Aerosol Particle Sensors
By Particle Measuring Systems
Product collateral
IsoAir sensors offer real-time particle monitoring giving quick notification of anomalies, .5 and 5.0 micron channels for GMP compliance, proven technology provides accurate data, and critical zone protection.
IsoAir PLUS Aerosol Particle Sensors
By Particle Measuring Systems
Product collateral
IsoAir PLUS sensors offer real-time particle monitoring giving quick notification of anomalies.
PTLF-22 laminar flow interlocking pass thru
By Isolation Systems Inc.
Product collateral
Isolation Systems Inc. provides product lit for the PTLF-22 laminar flow interlocking pass thru for air handling and qir quality control
PT-12, PT-22 and PT-33 coved corner interlocking pass thru
By Isolation Systems Inc.
Product collateral
Isolation Systems Inc. provides product lit for the PT-12, PT-22 and PT-33 coved corner interlocking pass thru for air handling and qir quality control..
Supplemental air fume exhaust hoods
By Isolation Systems Inc.
Product collateral
<P>Isolation Systems presents product info for its supplemental air fume exhaust hoods for air handling and air quality applications. </P>
VLR Series of Vertical Laminar Flow Recirculating Hood
By Isolation Systems Inc.
Product collateral
The Vertical Laminar Flow Recirculating Hood by Isolation Systems Inc. offer HEPA filtration and a backward curved integral blower motor for efficiency.
Cost-Effective Corrosive Fume Exhaust System
By Fab-Tech Inc.
Case study
In this case study, Fab-Tech Inc.’s PermaShield Pipe is installed on the exterior of Independent Sheet Metal Inc.’s factory, providing corrosion protection and structural integrity without internal sprinklers.
HLFC Series Horizontal Laminar Flow Console
By Isolation Systems Inc.
Product collateral
The Horizontal Laminar Flow Console by Isolation Systems Inc. offers HEPA filtration and a protective perforated 304 stainless steel screen down-stream for increased efficiency.
HRFC series of horizontal reverse flow console
By Isolation Systems Inc.
Product collateral
The Horizontal Reverse Flow Console offers HEPA filtration 99.99% efficient @ .3 microns, knife-edge to gel-seal trough to prevent air bypass between HEPA filter and frame, and pre-filtration is 70% efficient disposable POLY-FIBER.
Breakthrough Medical Device Uses Fab-Tech Inc.'s PermaShield Pipe
By Fab-Tech Inc.
Case study
In this case study, Fab-Tech Inc.’s PermaShield Pipe helps Boston Scientific’s medical device factory filter its corrosive fume exhaust.
Process gas venting
By Fab-Tech Inc.
Case study
In this case study, Fab-Tech Inc.’s PermaShield Pipe is installed in a Pfizer Inc. facility in Ireland, abating highly corrosive gas in a cost-effective manner.
Process vent handling hydrochloric acid vapors
By Fab-Tech Inc.
Case study
In this case study, Fab-Tech Inc.’s PermaShield Pipe is installed in a Roche Vitamins Inc. facility, offering a permanent fix to the original vent system, which previously had to be replaced at least every year.
Cleanroom services: ARAMARK's Service excellence program
By ARAMARK Cleanroom Services, Inc.
Product collateral
This product collateral outlines ARAMARK Cleanroom Services' Service Excellence Program.
There are currently no reports available for this topic.
Improving plastic pellet and powder inventory information on new vessels
By Kistler-Morse Corp.
Application note
In this application note, Kistler-Morse Corp. describes continuous weight information using KM direct support load cells and KM Weigh-II/SVS 2000 indicators on new storage vessel installations.
NOVA Chemicals optimizes existing materials to improve inventory systems
By Kistler-Morse Corp.
Case study
In this case study, NOVA Chemicals uses Kistler-Morse Corp.’s load cells to improve a polystyrene factory’s inventory system for check bins and silos.
There are currently no reports available for this topic.
Tablet and capsule manufacturing
By DI PharmaTech
White paper
DI PharmaTech provides a comprehensive understanding of solid dosage operations in the manufacturing process, including unit dose operations, methods of developing powders for tablet making and granule formulation in wet granulating process.
Delivery Systems with Phoqus Technology
By Cardinal Health
Product collateral
Cardinal Health will provide contract manufacturing services for Phoqus’ technology and delivery platforms and is co-promoting these offerings in major markets worldwide.
Simulated moving bed chromatography for preparative separation
By Novasep Inc.
White paper
This white paper by Novasep Inc. provides a basic understanding of moving bed chromatography, discusses the instrumentation used and offers an overview of developing a simulated moving bed method. It also surveys some industrial applications.
Recent developments in industrial high-performance preparative chromatography
By Novasep Inc.
White paper
This white paper by Novasep Inc. reviews the present state of modern industrial preparative chromatography (MIPC), and discusses modeling and optimization of the MIPC process and explains the most common approach for multi-column chromatography (MCC), simulated moving bed (SMB).
Chromatography with On-line HPLC and Ion Chromatography for Process Control
White paper
Ion chromatography incorporates special column chemistries and hardware to optimize the analysis of ions. These advantages are particularly useful for the analytical challenges encountered when analyzing for critical components in process solutions in industrial settings.
MEP HyperCel Hydrophobic Charge Induction Chromatography Sorbent
By Pall Corp.
Product collateral
MEP Hypercel by Pall Corp. is a high capacity, high selectivity chromatography sorbent specially designed for the capture and purification of monoclonal and polyclonal antibodies.
How biotech manufacturers can improve chromatography through customization
By Pall Corp.
White paper
This white paper by Pall Corp. offers recommendations to biotech manufacturers to achieve greater process efficiencies in chromatography.
Analysis of Complex Low Level Samples Using Cleavable ICAT Reagents, ...
By Applied Biosystems
Application note
In this application note, Applied Biosystems describes how the use of a new cleavable ICAT reagent combined with multidimensional liquid chromatography (MDLC) and two modes of mass spectrometry have enabled the identification and differential profiling of low level proteins from complex samples.
Chiralpak IB Chromatography Columns
By Chiral Technologies Inc.
Product collateral
The Chiralpak IB from Chiral Technologies is the latest product in the series of immobolized polysaccharide chiral chromatography columns.
Chromatography buffer systems
By Lab Connections
Application note
In this application note, Lab Connections describes chromatography buffer systems and presents an experiment to address issues associated with them.
Oligonucleotide purification by ion exchange chromatography
By GE Healthcare Bio-Sciences
Application note
In this application note, Amersham Biosciences, now GE Healthcare Bio-Sciences, describes how purification method development, optimization and scale-up of a 20-mer oligonucleotide is done by anion exchange chromatography on SOURCE 30Q.
Mustang XT5000 Membrane Chromatography Systems
By Pall Corp.
Product collateral
Mustang XT5000 capsules by Pall Corp. provide the benefits of membrane chromatography in a large-scale capsule format for single use processing. Each unit is constructed with Pall's Mustang multi-layer membrane format with an equivalent membrane volume of 5 liters per capsule.
Pharmaceutical industry CIP system
By Endress + Hauser
Application note
In this application note, Endress & Hauser describes a clean-in-place (CIP) system with a schematic diagram and explains the role of its instrumentation in pharmaceutical applications.
Clean-in-Place Operations for Thin-Cake Filtration Technologies
By BHS-Filtration Inc.
White paper
This white paper from BHS-Filtration Inc. discusses the choice of thin-cake separation technologies and their benefits to optimizing the effectiveness of the production process, and discusses clean-in-place (CIP) operations to meet current Good Manufacturing Practice (cGMP) guidelines.
DR Series Radial Diaphragm Valves for Fluid Systems
By Swagelok Co.
Product collateral
The Swagelok DR series radial diaphragm valve offers a cleaner, more compact way to manage sterile flow streams.
Clean in place for IBC filling and discharge stations
By Material Control Solutions Inc. (MATCON)
Product collateral
Matcon provides a range of Clean-In-Place (CIP) systems for their IBC Filling Stations (CTS) and Discharge Stations.
A guide to clean in place (CIP)
By A&B Process Systems Corp.
White paper
This white paper by A&B Process Systems Corp. is a guide to clean in place (CIP) technology, highlighting process validation and the design and basic operation of CIP systems.
The Aqueous Cleaning Handbook
By Alconox Inc.
White paper
This handbook by Alconox Inc. contains summaries of what aqueous cleaning is and how it works, alongside critical information on how to select an aqueous cleaner and make the most of the cleaning potential of an aqueous-cleaning system in many different industries.
S88 redefines clean in place operations
By Emerson Process Management
White paper
In this white paper, Emerson Process Management shows how the object-oriented and class-based programming techiques of the ANSI/ISA-S88 Batch Control standard (S88) can simplify the design, testing and validation of reusable modules such as those found in clean-in-place (CIP) processes.
Sterilization Wrapping System
By General Econopak Inc. (GEPCO)
Product collateral
General Econopak Inc. offers a complete assortment of sterilization wrapping systems in bags, covers, tubing, and wrappers in many shapes and sizes.
GMP Protective Covers
By General Econopak Inc. (GEPCO)
Product collateral
GEPCO's GMP Protective Covers fit machines, equipment and carts in your production area. Made from strong, durable Tyvek, covers are available in GEPCO’s exclusive GMP print, in white or with a yellow poly-coating.
Newform medical grade bag
By ATMI Packaging Inc.
Product collateral
The Newform Medical Grade Bag is composed of a pure, pinhole-free, medical grade polyethylene film produced by ATMI Packaging.
Wash systems for Matcontainer IBCs
By Material Control Solutions Inc. (MATCON)
Product collateral
The IBC Wash Station consists of a wash frame which supports a lower wash hopper complete with cone wash nozzles and an internal wash lance connected to a slave lid.
Wireless Verifying CIP
By Accutech
Product collateral
The only Accutech clean-In-place monitoring solution is a turnkey approach to monitoring that can plug into current systems.
Taking the mystery out of maximum allowable carryover (MAC) calculations for ...
By GE Analytical Instruments
Application note
This application note by GE Analytical Instruments presents a step-by-step understanding specific for establishing acceptance criteria limits for cleaning with the use of total organic carbon (TOC).
Plasacryl Technical Data Sheet
By Emerson Resources Inc.
Product collateral
Plasacryl by Emerson Resources Inc. is a blend of plasticizers formulated specifically for use in acrylic coatings.
Plasacryl AC
By Emerson Resources Inc.
Product collateral
Emerson Resources Inc.'s Plasacryl AC is a methacrylic coating system additive that can be used as a plastisizer, substrate de-tackifier, can prevent clogging, and aids in reducing tablet to tablet adhesion.
Plasacryl AC Data Sheet
By Emerson Resources Inc.
Product collateral
Plasacryl AC is a blend of plasticizers used in acrylic emulsion coatings. Plasacryl AC also contains a slip agent which greatly reduces and in some formulations eliminates the tackiness of acrylic emulsion coatings.
Drum Coating Systems
Product collateral
Glatt drum coating systems for coating, drying, granulating and pelletizing are used world-wide in the pharmaceutical industry.
Tablet coating basics
By DI PharmaTech
White paper
DI PharmaTech reviews the basics of film coating for pharmaceutical and nutraceutical tablets and describes common tablet coating defects.
Glatt Multi-Pan Coater
Product collateral
The new Glatt Multi-Pan Coater is designed specifically for research and development for coating tablets with aqueous or organic solvent solutions.
There are currently no reports available for this topic.
There are currently no reports available for this topic.
There are currently no reports available for this topic.
Guide to freeze drying for the laboratory
By Labconco Corp.
White paper
This white paper by Labconco Corp. serves as a basic guide to the freeze-drying process.
The logistics of filling and freeze drying using multiple isolators
By M&O Perry Industries
Case study
In this case study, M&O Perry Industries Inc. helps Aventis Pasteur to reconfigure a 400-square-foot space to accommodate a filling and freeze-drying facility that met current government requirements and internal specification.
Assure batch uniformity for freeze-dried products
By Lyophilization Technology Inc.
White paper
Lyophilization, or freeze drying, is becoming important in developing and manufacturing unstable, sensitive pharmaceuticals. This white paper by Lyophilization Technology Inc. discusses special challenges to achieving and ensuring batch uniformity with lyophilization.
Freeze Dryer Lyophilizer: REVO Series
By Millrock Technologies, Inc.
Product collateral
The REVO includes Millrock’s Opti-Dry PC/PLC freeze drying control system and offers varying options to meet life sciences needs.
AdVantage Benchtop Freeze Dryers
By VirTis
Product collateral
The VirTis Advantage freeze dryer incorporates VirTis freeze drying technology with the small footprint users demand in a benchtop freeze dryer.
Chemical resistance of freeze dryer components
By Labconco Corp.
Application note
In this application note, Labconco Corp. describes the FreeZone freeze dry system, which is designed to be chemical resistant to most compounds commonly used in lyophilization processes, and how to maintain the system.
Segregation prevention during pharmaceutical powder drying
By Bolz-Summix
Case study
In this case study, Bolz-Summix helps process industry companies eliminate granulation and minimize segregation by slightly differing process conditions during drying stages in the Bolz-Summix conical screw dryer.
Filter drier endpoint analysis using FT-NIR spectroscopy
By Bruker Optics Inc.
White paper
This white paper by Bruker Optics Inc. explains filter drier endpoint analysis using FT-NIR spectroscopy.
Benchtop K Series Freeze Dryers
By VirTis
Product collateral
The VirTis BenchTop “K” Series freeze dryers are offered in a range of condenser temperatures from -55°C to -105°C.
Cryopreservation manual: A guide to cryoprotective technique
By Thermo Electron Corp.
White paper
This white paper by Thermo Electron Corp. is a manual on cryopreservation techniques.
There are currently no reports available for this topic.
Solvent-Free Pilot and Process Scale Super Critical Fluid Extraction (SFE) ...
By Thar Technologies
Product collateral
Because pilot scale requirements vary greatly from application to application, Thar emphasizes flexibility and cost effectiveness in the design and development of its systems.
Enhancement of selectivity in sample cleanup for Tobramycin in serum
By Varian Inc.
Application note
In this application note, Varian Inc. describes how the selectivity in a sample cleanup for Tobramycin in serum can be enhanced using pre-solid phase extraction derivatization with orthophthalaldehyde (OPA), which has enhanced detection sensitivity by means of fluorescence detection of the derivative formed.
Supercritical fluid applications in manufacturing and materials production
By Teledyne Isco Inc.
Application note
In this application note, Teledyne Isco Inc. describes the applications of the supercritical fluid in manufacturing and materials production and outlines how and what kind of supercritical fluid pumps can be used.
Carbosep Membranes
By Novasep Inc.
Product collateral
Carbosep membranes by Novasep are available in a wide range of cut offs and trilobe membranes offer high flux rates with reduced numbers of membranes providing a more compact design.
How to design efficient and reliable feeders for bulk solids
By Jenike & Johanson Inc.
White paper
This white paper by Jenike & Johanson Inc. describes the design of two types of feeders for bulk solids, volumetric and gravimetric feeders.
Reactant feed
By Teledyne Isco Inc.
Application note
In this application note, Teledyne Isco Inc. describes types of chemical reactors, including batch or semi-batch, continuous stirred tank reactor and tubular or plug flow, and reactant feed setup.
Tablet press lubrication
By K-Tron International Inc.
Application note
In this application note, K-Tron International Inc. describes how its tablet press lubricant feeder helps control the amount of lubricant in the tablet press process, which is critical to overall product quality, and explains tablet press process and design.
Ensuring adequate feed supply from plastic pellet and powder supply day bins
By Kistler-Morse Corp.
Application note
In this application note, Kistler-Morse Corp. describes two technology solutions—continuous weight information using loadcell systems or level information using ultrasonic systems—to the problems faced by day bins supplying downstream operations.
A PSE approach for yield enhancement in bioprocessing
By Technion Israel Institute of Technology
White paper
This white paper, from Technion IIT, shows that a combination of improved process control in the downstream processing sections as well as a modified substrate feeding profile in the fermentor, can together achieve a 40 percent reduction in batch time while significantly increasing throughput yield for pharmaceutical manufacturing companies.
Solve solid handling problems by retrofitting
By Jenike & Johanson Inc.
White paper
This white paper by Jenike & Johanson Inc. describes solutions to solid handling problems.
OptiScale Disposable Capsule Filters
By Millipore Corp.
Product collateral
OptiScale capsules with sterilizing grade Durapore membranes are used for evaluating filtration applications such as cell culture media, small and large volume parenterals, and bacterial cell processing.
NOVA Chemicals optimizes existing materials to improve inventory systems
By Kistler-Morse Corp.
Case study
In this case study, NOVA Chemicals uses Kistler-Morse Corp.’s load cells to improve a polystyrene factory’s inventory system for check bins and silos.
Silo failures: Case histories and lessons learned
By Jenike & Johanson Inc.
White paper
This white paper by Jenike & Johanson Inc. discusses case histories of silo failures involving structural failure, which illustrate common mistakes as well as limits of design.
Fast simulated distillation
By Agilent Technologies
Application note
In this application note, Agilent Technologies describes a rapid simulated distillation method for the analysis of petroleum fractions boiling within the range of American Society for Testing and Materials (ASTM) D2887 using Agilent's 6890N gas chromatograph (GC).
Control of fermentation processes
By Ametek Process Instruments
White paper
This white paper by Ametek Process Instruments provides an overview of the fermentation process and advantages of using its ProLine process mass spectrometer over other traditional approaches.
BioFlo 410 Fermentation and Cell Culture Systems
By New Brunswick Scientific Co.
Product collateral
New Brunswick Scientific has developed a new line of full-featured benchtop sterilizable-in-place fermentors and bioreactors to help increase the productivity of the laboratory or research facility.
Repeater pump and accessories for fluid transfer and filling applications
By Baxa Corp.
Product collateral
Baxa Corp. introduces the repeater pump and accessories for fluid transfer and filling applications.
BD BioCoat coverslips
By BD Biosciences
Product collateral
The BD Biooat 35 mm dish with a coverslip bottom is easy to use and facilitates preparation of cells for microscopic analysis. The coverslip floor is Number 1 German glass which is optically clear and non-neurotoxic with low background fluorescence.
Rapid-Fill automated syringe filling system
By Baxa Corp.
Product collateral
Baxa Corp. presents this product information on rapid-fill automated syringe filling systems for packaging security and effectiveness.
Part feeding isolation for blow/fill/seal filler
By Steris Corp.
Case study
In this case study, a Steris Corp. VHP 1000 was an integral part of an isolation system designed by Automatic Liquid Packaging Inc. that eliminates the necessity of operation within a Class 100 cleanroom.
E-Series Depth filter sheets
By Pall Corp.
Product collateral
Registration is not necessary to view, download or add this product information from Pall Corp. to My Library.
K–Series Depth filter sheets
By Pall Corp.
Product collateral
Registration is not necessary to view, download or add this product information from Pall Corp. to My Library.
P–Series Depth filter sheets and modules
By Pall Corp.
Product collateral
Registration is not necessary to view, download or add this product information from Pall Corp. to My Library.
T–Series Depth filter sheets
By Pall Corp.
Product collateral
Registration is not necessary to view, download or add this product information from Pall Corp. to My Library.
Supracap 60 Depth filter capsules
By Pall Corp.
Product collateral
Registration is not necessary to view, download or add this product information from Pall Corp. to My Library.
Supracap 200 Encapsulated depth filter modules
By Pall Corp.
Product collateral
Registration is not necessary to view, download or add this product information from Pall Corp. to My Library.
Supradisc AKS Depth filter modules
By Pall Corp.
Product collateral
Registration is not necessary to view, download or add this product information from Pall Corp. to My Library.
Supradisc HP Depth filter modules
By Pall Corp.
Product collateral
Registration is not necessary to view, download or add this product information from Pall Corp. to My Library.
Supradisc II Depth filter modules
By Pall Corp.
Product collateral
Registration is not necessary to view, download or add this product information from Pall Corp. to My Library.
Novasip DV20 and DV50 virus removal filter capsules
By Pall Corp.
Product collateral
Novasip Ultipor VF capsule filters are disposable, Junior Style steamable assemblies designed to remove parvoviruses and other viruses from protein solutions.
Polyethersulfone Microfiltration Cassettes
By Sartorius Group
Product collateral
The polyethersulfone membrane (PESU) is a stable polymer that features a broad pH and temperature range. Its wide temperature range makes it possible to sterilize the membrane by either steam or autoclaving
Supradisc Depth Filter Modules
By Pall Corp.
Product collateral
Pall Corp. introduces Supradisc Depth Modules. Each module consists of three major components; filter cells or lenticles, tubular, and adapters.
Gamma compatible sterilizing grade filter capsules for use with disposable ...
By Millipore Corp.
Application note
This application note by Millipore Corp. explains how plastic storage systems using disposable technology including filters are currently being used as alternatives to more expensive glass and stainless steel containers.
Detecting microbiological contamination using the MicropreSure online ...
By Millipore Corp.
Application note
This application note from Millipore Corp. describes the importance of increased sample volumes and sampling times when using an online filtration sampler—such as Millipore's MicropreSure—to detect low-level microbial contamination and/or random biofilm detachment events in a water system.
Environmental Sampling Products
By Millipore Corp.
Product collateral
Millipore offers a wide variety of filtration devices and accessories for collecting and analyzing environmental contaminants in water, air, and soil focusing on water chemistry, water microbiology, air monitoring, and hardware and accessories.
Kleenpak Capsule Filters with Ultipor N66 Membrane
By Pall Corp.
Product collateral
Pall Kleenpak sterilizing-grade capsule filters with intrinsically hydrophilic Ultipor N66 membrane are self-contained sanitary filters designed for convenient small-batch sterile filtration of most pharmaceutical solutions.
E-Series Depth Filter Sheets
By Pall Corp.
Product literature
E-Series by Pall Corp. is a new filter paper with depth filter properties for use in the pharmaceutical industry. It substitutes for conventional filter paper in solid and liquid separation or clarifying filtration.
Sartobran P Sterilizing Grade Filter Cartridges
By Sartorius Group
Product collateral
Sartorius Corp.'s Sartobran P sterilizing grade filter cartridges offer ultra low unspecific binding capacity of the cellulose acetate membranes assuring high protein yield and rapid preservative recovery.
Kleenpak HT Connector
By Pall Corp.
Product collateral
The disposable, Kleenpak connector by Pall Corp. allows for the dry connection of two separate fluid pathways, while maintaining the sterile integrity of both.
Marksman Elements with Nexis A Series Depth Filters
By Pall Corp.
Product collateral
Marksman elements with Nexis A Series Filters by Pall Corp. contain high-capacity melt-blown depth filter media in a 152 mm (6 in.) wide diameter cartridge with in-to-out flow.
All about fittings
By Upchurch Scientific Inc.
White paper
This white paper by Upchurch Scientific Inc. provides a solid understanding of how high-pressure liquid chromatography (HPLC) fittings work and when to use different fittings products.
Jacketed piping and fittings—a versatile method of temperature control
By A&B Process Systems Corp.
White paper
This white paper by A&B Process Systems Corp. explains jacketed piping and fittings, which are a versatile method of temperature control, and the material and heating media used. It also makes a cost comparison with other options such as insulated piping.
TS Series Biopharm Fittings for Fluid Systems
By Swagelok Co.
Product collateral
Swagelok TS series biopharm fittings are designed to solve problems inherent in conventional ISO 2852 sanitary fittings, gasket extrusion and the resulting fluid holdup.
BPE Series 88° and 92° Drainable Angle Fittings
By Swagelok Co.
Product collateral
Swagelok Co. offers elbow fittings manufactured with 88° and 92° bends and an 88° tee ease installation of fully drainable and cleanable process systems.
Contamination leads to losses
By Swagelok Co.
Case study
In this case study, Swagelock Co. provides Viventia Biotech Inc. with DR series radial diaphragm valves to reduce the incidence of contamination dramatically, reducing process downtime and cost of consumables.
Be a control freak: Upchurch Scientific valves
By Upchurch Scientific Inc.
Application note
This application note from Upchurch Scientific Inc. describes its shut-off, micro-metering and micro-splitter flow control valves.
Jensen Series Centrifugal Pumps for Fluid Systems
By Swagelok Co.
Product collateral
Swagelok Jensen centrifugal pumps feature 3-A compliance, clean-in-place design, easy disassembly to facilitate maintenance, and are available in six models suitable for low-viscosity fluids.