General Building
FEATURED REPORTS
WHAT'S NEW
-
Why Do you Need to be Concerned About Global Hazard Communications?
by American Industrial Hygiene Assn.
White paper
This white paper from the American Industrial Hygiene Association states that if material data safety sheets (MSDSs) are to remain a valuable tool in the protection of workers and others, all industrialized countries must work together to see that they contain the most reliable and accurate data available.
-
RFID for the real world: Challenges and opportunities in the warehouse and ...
by FKI Logistex North America
White paper
In this two-part white paper, FKI Logistex discusses the challenges of radio frequency identification (RFID) adoption in the pharmaceutical industry and a common-sense, measured response to intelligently evaluating and implementing RFID.
REPORTS BY SUBTOPIC
PTLF-22 laminar flow interlocking pass thru
By Isolation Systems Inc.
Product collateral
Isolation Systems Inc. provides product lit for the PTLF-22 laminar flow interlocking pass thru for air handling and qir quality control
PT-12, PT-22 and PT-33 coved corner interlocking pass thru
By Isolation Systems Inc.
Product collateral
Isolation Systems Inc. provides product lit for the PT-12, PT-22 and PT-33 coved corner interlocking pass thru for air handling and qir quality control..
Cost-Effective Corrosive Fume Exhaust System
By Fab-Tech Inc.
Case study
In this case study, Fab-Tech Inc.’s PermaShield Pipe is installed on the exterior of Independent Sheet Metal Inc.’s factory, providing corrosion protection and structural integrity without internal sprinklers.
VLR Series of Vertical Laminar Flow Recirculating Hood
By Isolation Systems Inc.
Product collateral
The Vertical Laminar Flow Recirculating Hood by Isolation Systems Inc. offer HEPA filtration and a backward curved integral blower motor for efficiency.
HLFC Series Horizontal Laminar Flow Console
By Isolation Systems Inc.
Product collateral
The Horizontal Laminar Flow Console by Isolation Systems Inc. offers HEPA filtration and a protective perforated 304 stainless steel screen down-stream for increased efficiency.
HRFC series of horizontal reverse flow console
By Isolation Systems Inc.
Product collateral
The Horizontal Reverse Flow Console offers HEPA filtration 99.99% efficient @ .3 microns, knife-edge to gel-seal trough to prevent air bypass between HEPA filter and frame, and pre-filtration is 70% efficient disposable POLY-FIBER.
Modeling and simulation: The return on investment in materials science
By IDC
White paper
According to this white paper from IDC, there is significant return on investment (ROI) from the use of modeling and simulation software tools in partnership with traditional experimentation -- its research suggests a cumulative ROI three to nine times greater than the amount invested in these tools and associated expertise.
Application Guide - Toxic Gas Products
By General Monitors Inc.
Product collateral
General Monitors' toxic gas detectors are designed with advanced electrochemical, metal oxide semiconductor (MOS) and infrared sensing elements for use in dangerous environments where reliability and precision are essential.
Sigma Air Manager: Compressed air system control
By Kaeser Compressors Inc.
Product collateral
<P>Kaeser's Sigma Air Manager provides energy-saving, demand-related pressure band controls with visualization of operational data.</P>
Modeling industrial crystallizers
By Fluent Inc.
White paper
One of the main challenges in industrial crystallizers is to control the crystal size distribution. In this white paper by Fluent Inc., crystallization behavior and the effects of fluid mechanics in pharmaceutical manufacturing is discussed.
SFC Series 75 to 250: Sigma frequency control
By Kaeser Compressors Inc.
Product collateral
<P>Kaeser SFC Series 75 to 250 air controls offer an integrated system design and allow for retrofitting existing compressors.</P>
Pharma labels fail the toughness test
By Matco Associates Inc.
White paper
An independent lab tested a variety of pharmaceutical product labels from different suppliers for durability when exposed to harsh elements. According to this white paper from Matco Associates Inc., the elements won.
State of the process automation industry
By Micro Motion, a division of Emerson Process Management
White paper
This white paper provides an overview of the global process automation industry, as well as snapshots of the industry's recent and future development in various regions of the world.
Using Model Predictive Control-based PAT to optimize distillation
By Micro Motion, a division of Emerson Process Management
Application note
This application note describes how advanced automation is improving process understanding and product quality at Baxter's anesthetics facility in Guayama, Puerto Rico.
Load cells versus Coriolis mass flowmeters
By Micro Motion, a division of Emerson Process Management
White paper
This paper includes an overview of load cell weighing systems and Coriolis mass flow technologies, a discussion of special considerations and benefits that each technology provides, and the costs associated with their engineering and installation.
Sigma Air Manager: Compressed air system control
By Kaeser Compressors Inc.
Product collateral
<P>Kaeser's Sigma Air Manager provides energy-saving, demand-related pressure band controls with visualization of operational data.</P>
How Plastic Cooling Towers Slash Downtime and Service Costs
By Delta Cooling Towers Inc.
White paper
This white paper from Delta Cooling Towers Inc. describes specific applications of plastic towers and their associated cost savings, including whether cooling capacity is sufficient to the demands of the operation; whether the towers require maintenance that is interrupting business, and how much the towers cost in water treatment.
Flooring system meets challenges at vaccine pilot plant
By Sherwin-Williams Co.
White paper
This white paper by Sherwin-Williams Co. describes flooring challenges at vaccine pilot plants in the pharmaceutical industry.
Evaluating and specifying ergonomic matting in pharmaceutical processing ...
By Ergomat
White paper
This white paper by Ergomat outlines the fundamental questions pharmaceutical professionals should ask to outfit their work area, laboratory or cleanroom with the most appropriate floor matting.
Platforms and catwalks in the processing industries
By A&B Process Systems Corp.
White paper
This white paper by A&B Process Systems Corp. explains platforms and catwalks in the processing industries.
Ergomat Hygiene high quality and cleanability mats
By Ergomat
Product collateral
The Ergomat Hygiene is made of premium rubber and is designed to increase comfort while reducing tripping hazards, body aches, quality issues and sick leaves.
Modeling industrial crystallizers
By Fluent Inc.
White paper
One of the main challenges in industrial crystallizers is to control the crystal size distribution. In this white paper by Fluent Inc., crystallization behavior and the effects of fluid mechanics in pharmaceutical manufacturing is discussed.
Transfer panels: The key to effective fluid distribution in process systems
By A&B Process Systems Corp.
White paper
This white paper by A&B Process Systems Corp. explains the design, construction and installation of stainless steel transfer panels.
High shear fluid processing: More precise homogenization
By Microfluidics Corp.
White paper
This white paper by Microfluidics Corp. explains High Shear Fluid Processing method, which involves the creation of highly-controlled shear rates that are orders of magnitude greater than any other conventional means.
Monitoring the water content in heat transfer fluid
By Bruker Optics Inc.
White paper
This white paper by Bruker Optics Inc. describes the process of monitoring the water content in heat transfer fluid.
Instantaneous Microbial Detection
By BioVigilant Systems Inc.
White paper
This white paper by BioVigilant Systems Inc. discusses its optical technology, which can determine the quantity and size of particles in liquid or air and whether each particle is inert or biologic, resulting in instantaneous and continuous microbial detection.
Development of a Bench-Top Time Proportional Humidity Generator
By GE Infrastructure Sensing
White paper
A design approach for a bench-top humidity calibration chamber,described in this white paper by GE Infrastructure Sensing, utilizes volumetric mixing of dry air and saturated air via time proportioning of a three-way solenoid activated valve.
Innovative Drug-Delivery Technologies for Oral Modified-Release Products
By Cardinal Health
Product collateral
Cardinal Health's new drug delivery technologies for oral modified-release products aim for improved dissolution, enhanced taste making, higher drug loading, and a unique matrix delivery system.
Cost-Effective Corrosive Fume Exhaust System
By Fab-Tech Inc.
Case study
In this case study, Fab-Tech Inc.’s PermaShield Pipe is installed on the exterior of Independent Sheet Metal Inc.’s factory, providing corrosion protection and structural integrity without internal sprinklers.
TD-12-FM and TD-14-FM tear drop air foil luminaries
By Isolation Systems Inc.
Product collateral
<P>Isolation Systems TD-12-FM and TD-14-FM tear drop air foil luminaries are an integral part of facility and cleanroom efficiency. </P>
PT-12, PT-22 and PT-33 coved corner interlocking pass thru
By Isolation Systems Inc.
Product collateral
Isolation Systems Inc. provides product lit for the PT-12, PT-22 and PT-33 coved corner interlocking pass thru for air handling and qir quality control..
FT series Flow Thru clean room luminaries
By Isolation Systems Inc.
Product collateral
Registration is not necessary to view, download or add this product information from Isolation Systems Inc. to My Library.
The fundamental concepts of excellence: EFQM
By European Foundation for Quality Management
White paper
This white paper by European Foundation for Quality Management (EFQM), a membership-based not-for-profit organization, describes the EFQM excellence model, a primary framework for assessing and improving organizations so they achieve a sustainable advantage.
Mastering the Challenges of Temperature-Sensitive Distribution in the Supply ...
By ChainLink Research Inc.
White paper
This white paper from ChainLink Research discusses the combination of enhanced policy, process, performance and enablers that provides the key to success for cold chain management.
Next-generation logistics: Secure track and trace
By Kezzler AS
White paper
In this white paper, Kezzler AS discusses how logistical and manufacturing systems must merge and evolve with tracking technologies to make the supply chain truly secure.
cGMP Informatics: IT Infrastructure Design for 21st Century Pharmaceutical QC...
By VelQuest Corp.
White paper
This white paper from VelQuest Corp. outlines a three-tiered IT architecture combining an ERP platform, a LIMS system, and a GMP Electronic Notebook to improve productivity, cost and compliance for pharmaceutical manufacturers.
The hidden pitfalls of determining your current overall equipment effectiveness
By Parsec Automation Corp.
White paper
This white paper by Parsec Automation Corp. discusses how overall equipment effectiveness allows pharmaceutical manufacturers to study all sources of lost time and lost production. This has emerged as the leading approach for accurately measuring true plant productivity.
State of the process automation industry
By Micro Motion, a division of Emerson Process Management
White paper
This white paper provides an overview of the global process automation industry, as well as snapshots of the industry's recent and future development in various regions of the world.
RFID for the real world: Challenges and opportunities in the warehouse and ...
By FKI Logistex North America
White paper
In this two-part white paper, FKI Logistex discusses the challenges of radio frequency identification (RFID) adoption in the pharmaceutical industry and a common-sense, measured response to intelligently evaluating and implementing RFID.
Process optimization: From petrochemicals to biopharmaceuticals
By Bayer Technology Services GmbH
White paper
In this white paper, Bayer Technology Services (BTS) describes adapting process optimization methods and tools from petrochemical plants to biopharmaceutical manufacturers, including semi-batch biotech processes, computer simulation and total performance optimization.
Reclaiming precious metals from spent carbon catalysts
By Sabin Metal Corp.
White paper
Manufacturers often fail to recognize the value in reclaiming precious metals used in catalysts to facilitate reactions during many production processes. At the end of a catalyst's useful life, the remaining precious metals could easily be worth hundreds of thousands of dollars, according to this white paper from Sabin Metal Corp.
How Plastic Cooling Towers Slash Downtime and Service Costs
By Delta Cooling Towers Inc.
White paper
This white paper from Delta Cooling Towers Inc. describes specific applications of plastic towers and their associated cost savings, including whether cooling capacity is sufficient to the demands of the operation; whether the towers require maintenance that is interrupting business, and how much the towers cost in water treatment.
Platforms and catwalks in the processing industries
By A&B Process Systems Corp.
White paper
This white paper by A&B Process Systems Corp. explains platforms and catwalks in the processing industries.
Reclaiming precious metals from spent carbon catalysts
By Sabin Metal Corp.
White paper
Manufacturers often fail to recognize the value in reclaiming precious metals used in catalysts to facilitate reactions during many production processes. At the end of a catalyst's useful life, the remaining precious metals could easily be worth hundreds of thousands of dollars, according to this white paper from Sabin Metal Corp.
RFID for the real world: Challenges and opportunities in the warehouse and ...
By FKI Logistex North America
White paper
In this two-part white paper, FKI Logistex discusses the challenges of radio frequency identification (RFID) adoption in the pharmaceutical industry and a common-sense, measured response to intelligently evaluating and implementing RFID.
Pharma labels fail the toughness test
By Matco Associates Inc.
White paper
An independent lab tested a variety of pharmaceutical product labels from different suppliers for durability when exposed to harsh elements. According to this white paper from Matco Associates Inc., the elements won.
Stainless steel primer
By Hurst Corp.
White paper
This white paper from Hurst Corp. goes over the basics of the types of stainless steel and its attributes.
Next-generation logistics: Secure track and trace
By Kezzler AS
White paper
In this white paper, Kezzler AS discusses how logistical and manufacturing systems must merge and evolve with tracking technologies to make the supply chain truly secure.
Why Do you Need to be Concerned About Global Hazard Communications?
By American Industrial Hygiene Assn.
White paper
This white paper from the American Industrial Hygiene Association states that if material data safety sheets (MSDSs) are to remain a valuable tool in the protection of workers and others, all industrialized countries must work together to see that they contain the most reliable and accurate data available.
cGMP Informatics: IT Infrastructure Design for 21st Century Pharmaceutical QC...
By VelQuest Corp.
White paper
This white paper from VelQuest Corp. outlines a three-tiered IT architecture combining an ERP platform, a LIMS system, and a GMP Electronic Notebook to improve productivity, cost and compliance for pharmaceutical manufacturers.
There are currently no reports available for this topic.
Facility monitoring systems and 21 CFR part 11 compliance
By Lighthouse Worldwide Solutions
Application note
In this application note, Lighthouse Worldwide Solutions describes the benefits of facility monitoring systems to establish compliance with 21 CFR Part 11 regulations.
Platforms and catwalks in the processing industries
By A&B Process Systems Corp.
White paper
This white paper by A&B Process Systems Corp. explains platforms and catwalks in the processing industries.
Report on safe, appropriate uses for filtered self-contained enclosures
By Labconco Corp.
White paper
This white paper by Labconco Corp. discusses the need for alternatives to fume hoods, such as a non-ventilated fume hood, and filtration systems.
Why Do you Need to be Concerned About Global Hazard Communications?
By American Industrial Hygiene Assn.
White paper
This white paper from the American Industrial Hygiene Association states that if material data safety sheets (MSDSs) are to remain a valuable tool in the protection of workers and others, all industrialized countries must work together to see that they contain the most reliable and accurate data available.
There are currently no reports available for this topic.
There are currently no reports available for this topic.
C-18 Reversed Phase RediSep
By Teledyne Isco Inc.
Application note
In this application note, Teledyne Isco Inc. describes the proper cleaning and storage of its reusable RediSep C-18 reversed phase columns, which help extend column life and improve consistency and reliability.
Issues in complying with the Prescription Drug Marketing Act
By Cimquest Inc.
White paper
This white paper by Cimquest Inc. provides background on the development of the Prescription Drug Marketing Act (PDMA) and specific regulations associated with it, including distribution, storage, disposal, validation, security and enforcement.
Mastering the Challenges of Temperature-Sensitive Distribution in the Supply ...
By ChainLink Research Inc.
White paper
This white paper from ChainLink Research discusses the combination of enhanced policy, process, performance and enablers that provides the key to success for cold chain management.
RFID for the real world: Challenges and opportunities in the warehouse and ...
By FKI Logistex North America
White paper
In this two-part white paper, FKI Logistex discusses the challenges of radio frequency identification (RFID) adoption in the pharmaceutical industry and a common-sense, measured response to intelligently evaluating and implementing RFID.
Stainless steel primer
By Hurst Corp.
White paper
This white paper from Hurst Corp. goes over the basics of the types of stainless steel and its attributes.
Why Do you Need to be Concerned About Global Hazard Communications?
By American Industrial Hygiene Assn.
White paper
This white paper from the American Industrial Hygiene Association states that if material data safety sheets (MSDSs) are to remain a valuable tool in the protection of workers and others, all industrialized countries must work together to see that they contain the most reliable and accurate data available.
There are currently no reports available for this topic.
